Allume’s SolShare enables you to fine-tune the energy efficiency rating of each flat by precisely allocating solar energy to meet specific EPC targets. This translates to a customised SAP boost of 5-15 points.
Maximise your ROI by directing the exact amount of solar energy (kWp) to each flat.
No sign ups, no complexity.
SolCentre provides you with all the energy data you need: total energy demand, and solar delivered, consumed & exported. On a per flat basis.
Pair SolShare with batteries, PV diverters, and smart devices to achieve your sustainability goals.
Suitable for private & B2R, and traditional or private wire building networks.
Improve the carbon savings (DER), the running costs of the building, and achieve Part L compliance.
Allume’s SolShare enables you to fine-tune the energy efficiency rating of each flat by precisely allocating solar energy (kWp) to meet specific SAP and EPC targets. This table shows how modular house builder TopHat have specified the exact amount of solar (kWp) to each flat to bring them all from a varying EPC C to a level EPC B.
| Without SolShare | With SolShare | |||||
| Flat Type | SAP Rating | EPC Band | kWp Allocation | SAP Score Increase | New SAP Rating | New EPC Band |
|---|---|---|---|---|---|---|
| 2B4P Top floor | 72 | C | 1.5 | 9 | 81 | B |
| 2B4P Mid floor | 77 | C | 1 | 5 | 82 | B |
| 2B4P Ground floor | 72 | C | 1.6 | 9 | 81 | B |
| 1B2P Top floor | 76 | C | 1 | 6 | 82 | B |
| 1B2P Mid floor | 80 | C | 0.5 | 2 | 82 | B |
| 1B2P Ground floor | 75 | C | 1 | 7 | 82 | B |
| Without SolShare = All EPC C | ||
| Flat Type | SAP Rating | |
|---|---|---|
| 2 Bed Top floor | 72 | |
| 2 Bed Mid floor | 77 | |
| 2 Bed Ground floor | 72 | |
| 1 Bed Top floor | 76 | |
| 1 Bed Mid floor | 80 | |
| 1 Bed Ground floor | 75 | |
| With SolShare = All EPC B | ||
| Flat Type | New SAP Rating | |
|---|---|---|
| 2 Bed Top floor | 81 | |
| 2 Bed Mid floor | 82 | |
| 2 Bed Ground floor | 81 | |
| 1 Bed Top floor | 82 | |
| 1 Bed Mid floor | 82 | |
| 1 Bed Ground floor | 82 | |
Allume can provide a free assessment for your project that will demonstrate the SAP uplift for each flat and indicative costs.
Image Box text
SolShare creates a direct, behind-the-meter connection of rooftop solar PV to each flat in the building. Take a deeper dive into how it works.
Watch a short video on what residents say about the benefits that they’ve seen because of SolShare.
Yes. The SolShare is classed as a direct connection of solar PV to flats. It therefore qualifies for SAP 10.2 PV credits – typically adding 5-15 SAP points to each flat.
Yes. The SolShare typically adds 5-15 SAP points to a flat. As each EPC band is around 10 points, each flat is highly likely to increase it’s EPC band by at least one rating.
No. Depending on your requirements, you can select just some of the flats to be connected to solar. The most common reason for this is that some of the flats have not achieved the desired EPC rating. If this is the case, you can connect just those flats to the solar to achieve your EPC goals at the lowest possible cost.
Yes, any separately metered connection can be added to a SolShare system, including the Landlord supply.
The SolShare comes with an industry standard 10-year warranty.
Yes, batteries can be included in the system. Even better, because the SolShare is a shared system, your batteries will also be shared. This means that rather than needing to buy an expensive battery for every connected unit, you simply by a communal battery that everyone uses when they need it. This greatly increases their value for money.
Every SolShare installation is unique. Once we have gained the relevant information from you, we will introduce you to one of our certified SolShare installation partners. They will be able to talk you through what is most suitable for your building.
Typically, SolShare is suitable for apartment buildings that have more than 6 apartments. Send us an enquiry and we will be happy to see if our technology is suitable for your apartment building.
Every connected unit will receive feed-in tariff payment for any solar they don’t use.
The SolShare ensures that the same quantity of solar is delivered to each connected unit over the course of each month. It works hard to deliver each unit’s solar when they are using power and therefore when they’re going to save the most amount of money. However, if this is not possible and more solar is being delivered than can be consumed then it will be exported to the grid and your retailer will buy it off you.
No. Residents can stay with their existing retailer, or to choose to change to another one. They can also access any market protections provided for vulnerable electricity customers, if applicable.
SolShare can be installed onto an existing PV system under certain circumstances. Typically, if the system is simply connected to the Landlord meter, a SolShare can be retrofitted to this system. We are very happy to review any existing system that may be installed to confirm the compatibility with SolShare.
Allume can provide a free assessment for architects, consultants and developers, indicating SAP uplift and costs. Gives us some details below and our technical team will reach out.
AUS
US
